On October 25, ESA’s Proba-2 spacecraft captured two partial solar eclipses. This image depicts one of them. See the video below for both eclipses in higher resolution.
ESA’s Proba-2 spacecraft captured two partial solar eclipses on October 25, 2022.
Proba-2 is the second spacecraft of a series, building on nearly eight years of successful Proba-1 experience. Proba stands for PRoject for OnBoard Autonomy. The Proba satellites are among the smallest ever to be flown by the European Space Agency (ESA), but they are making a big impact in space technology.
A solar eclipse is caused by the movement of the Moon around Earth. Despite their much different sizes, due to their separation, the Moon appears to be about the same size as the significantly larger Sun in the sky. Occasionally, the Moon passes in front of the Sun, blocking its light, so that part of the Earth’s surface is in the Moon’s shadow. The line-up is not always perfect, and so not every eclipse is a total solar eclipse.
Proba stands for PRoject for OnBoard Autonomy. The Proba satellites are among the smallest ever to be flown by ESA, but they are making a big impact in space technology. Proba-2 is the second of the series, building on nearly eight years of successful Proba-1 experience. Credit: ESA
On October 25 only part of the Sun’s light was blocked by the Moon, creating what is known as a partial eclipse. It was visible from most of Europe, North Africa, the Middle East, and parts of Asia, with the Moon blocking 82% of the sunlight near the North Pole. In Europe, up to 40% of the sunlight was obscured during the event.
This partial eclipse was observed by ESA’s Proba-2 mission from its unique vantage point in space. Its SWAP instrument studies the Sun in the extreme ultraviolet (EUV) light where it focuses on the solar corona – the Sun’s hot turbulent atmosphere – at temperatures of about a million degrees. The corona is seen in the background of this video.
For us on Earth, the Moon passes only once in front of the Sun during a solar eclipse. Since Proba-2 orbits the Earth in about 100 minutes, it was able to observe this eclipse not once but twice. Additionally, the Moon was first observed while traversing the field of view in the upper right corner, but not blocking any solar light. The first observation of the eclipse around 10:30 UTC (12:30 CEST) was cut short as Proba-2 experienced an occultation. Such an occultation occurs when Proba-2 flies through the Earth’s atmosphere and the SWAP instrument is not active. The second partial eclipse was captured around 12:25 UTC (14:25 CEST). The movie embedded above shows both eclipses.
Proba-2 is a 0.6 × 0.6 × 0.8 meter (2.0 × 2.0 × 2.6 foot), box-shaped structure with two deployable solar panels and a nominal weight of 130 kilograms. The primary mechanical structure consists of three aluminum honeycomb panels arranged in an H configuration and a bottom panel that acts as the interface to the launch vehicle. Almost all the satellite system units are mounted on these inner panels. Credit: ESA/Pierre Carril
ESA’s Sun-watching spacecraft monitor the Sun’s behavior to better understand the influence of space weather on our home planet. The ESA-led Solar Orbiter mission, in partnership with NASA, is orbiting the Sun from closer than ever before and will provide the first high-resolution images of the Sun’s poles. Meanwhile, ESA Vigil will be the first mission to keep a constant eye on brewing space weather events, to better protect vital infrastructure on Earth and in orbit.
